Product Design3D PrintingWater QualityMobile Cleaning

Inline Water-Quality Sampling
for a Mobile Window-Cleaning System

6 mm
push-fit sample take-off
Live
purity reading while the tank fills
3D
printed housing, hose-line fit

The Brief

An independent window-cleaning operator fills his van tank through a dual-stage deionising resin setup. He wanted to see water purity at a glance while the tank filled, using a low-cost pen-style TDS meter, without stopping to dip a cup in the flow.

The Problem

Pen-style meters are made for dipping in a cup, and putting one in the main fill line would choke the flow and stretch a minutes-long fill into something far slower. The meter needed to see the water without sitting in the way of it.

The Design

We designed a compact inline housing that connects straight into the garden-hose fill line. A small restricted bleed hole diverts a trickle of the flow to a 6 mm push-fit connection, which carries a continuous sample to the meter. The rest of the water carries on through the line to the tank, so purity can be watched for the whole fill.

The housing: hose connections at each end, with the 6 mm push-fit sample take-off on top.

Why a Bleed Sample

Sampling a small bleed rather than the whole flow is a standard instrumentation approach. It keeps the monitoring device small and cheap, keeps the main line moving, and uses a standard 6 mm push-fit so the meter side can be changed or upgraded without touching the housing.

Deliverable

A modelled, print-ready housing with hose-line connections and an integrated restricted bleed to a 6 mm sample take-off, for continuous water-quality monitoring while the tank fills.

Got a similar problem? Call for a free initial consultation.

07549 032776